MG Infinite Justice Review part 2 (detail, assemble process and structure)

I almost forget to make this post and post the third part of the review. I was thinking where are all the pictures that i want to talk about? So, here it is. In this part, i'm going to focus on three things which are the details, assemble process and the structure. 

So, first we had the details. I'm sure most of you had heard about this kit and some of you even own one of it. If you prefer to detail up (i mean painting) the inner frame of MG kit, this kit will be my suggestion. It come with lot of detail not only on the inner frame but those hidden area for thruster as well (the backpack). I actually took some photos of the inner frame before i assemble everything (just scroll down). 

As for the assemble process, it's pretty straight forward. Although it come with lot of tiny part because most of the part are molded separately and the joints are just incredible. From the assemble process, it show it almost perfect to make any dynamic pose (all you need is a close up wide angle lens). Due to most of the parts are molded separately, there are only few foil stickers come with this kit and mostly are use as the censor in the head unit. 

In terms of the structure, the thing that i want to point out is this MG Seed/Destiny series are design more focus on the inner frame. The inner frame can stand alone independently without much supportive part from the outer armor to hold everything together. On top of that, most of the armors are easily detach from the inner frame. I remember i took some photo with some of the armors off from the inner frame with mechanical chain base. Other than the design, most of the main joints for this kit are very sturdy. What i means is those joint that connect legs, arms, head unit and backpack. I feel the sturdiness of those joints are even stronger that the parts to build the joint itself (so, be careful when it come to pose to prevent those part break). Good thing is those joint can last for long period but posing the kit might be a bit difficult. While the main joints looking good, other joint or clip for weapons or accessory are not that good especially the shield. Hope the paint can help by thickening those part. There are lot of people complain about the clip on the palm are useless but for me, i think it works pretty well (better than old type MG series such as MG strike, MG wing ver.ka, etc...).

The.. Big.. Red.. One.. is here!!!

It took so long for it to complete its journey from Japan to Hong Kong and finally reach Malaysia, haha. I was waiting at my home for two days when i know it reach Malaysia and i was crazy whenever i heard van or truck engine pass my house but at last, i was not at home when it arrive (damn). So, this will consider as this month's loots. I really can't wait to build it.

And this is the new line that i'm going to review, the SD Gundam Action Figure. Something new for me as i never purchase or review any figure before. Lets see what it got on my coming post.

Project MG Destiny EBM AIF Detail Evolve version (update)

Alright, backpack is done, pla-plate process is done too. I guess that's all i want to add it in and the next thing i'm going to do will be sanding before go for priming and painting.

I have no idea what to do with the wing at all. There are lot of curve and uneven surface which made me very difficult to cut the pla-plate according to the uneven surface and the shape of the wing. I think of doing some armor trimming but i don't have the right tools. So, i guess that's it for the wings and backpack.

MG Infinite Justice Review part 1 ( with a little bit of update)

While my study completed and waiting for the convocation, i still trap in something which made me quite busy for these few weeks. The reason is all about money and time, i got a lot of time to do anything i want now but the problem is everything need money which i running out of it. Therefore, i might spend more with more time i have and the best way to cut of spending and use those free time wisely will be, working or look for a full time job. I went for few interviews last week and almost every day, there is a new interview coming in since i can apply it from the Jobstreet easily. My schedule was a mess. Some of the interview success and some of it still pending means fail. My mom told me one thing, be patient and wait for the most suitable one when i told her why not i simply pick one of the job and spend my free time to get money while looking for other job. She said i won't quit the job that i simply choose once i'm in it (due to many "predicted" reason), and the best part is, "isn't you have lot of gunpla (from my boss) in the room and why not you build all of it while you're free", i was like "am i dreaming?"

So, that's all for the my updates and back to the next review item, the MG Infinite Justice. If you build a MG Destiny, you should build a MG Infinite Justice too (So you can have it fight each other). This kit was release around 2008 or 09, i can't remember but all i remember is i bought it around RM 165 that time and now it cost about RM 175 to RM185 in most of the local hobby shop (since Yen has increase a lot recently). Well, i think i don't to put out the introduction of this gundam since it's partner Strike Freedom gundam was so famous no matter how much you like it or hate it. What i want to share in this part one will be the design of the gundam itself. So, let me start of with the concept of this gundam. It was design to be melee and medium distance combat mobile suit compare to Strike Freedom which have a lot of beam rifle. Improve from the old Justice gundam, this thing have more beam now and the Fatum 1 (the backpack which is a detachable flying unit) look more aero-dynamic. I mean if any gundam think of fighting it in a close combat, it's kick equip with beam while the right hand holding 2 x Super Lacerta (beam saber) combine together and the left hand equip with shield plus the beam boomerang  which can use as beam blade when it attach on the shield. The wing of the Fatum 1 equip with beam as well and when the enemy try to run away from it, it still can fire the enemy without using it beam rifle by its beam cannon mounted on Fatum 1. The best opponent that i think of, Exia but most of the blade that Setsuna like to throw on it will deflect by Griffon (the knee blade or beam) and block from the shield (haha). 

A very dynamic pose in the box art and it should a scene that it fight with Destiny gundam while the Legend gundam was looking on it and ready to provide some support to Destiny gundam.

Customizing gunpla base on the gundam original concept (OC) versus personal concept (PC)

I know this post is a bit lame but since after I joined some forums, it really change my mind about gunpla customization. I used to think that straight build will be the best and forget about the word customization. As long as I clear all nub marks and all paint went smooth on the surface, it should be perfect. I think I start to paint my gunpla about 2 to 3 years ago and started to realize customization is something fun to do but there is always one problem that I face (or some amateur modeler) is from where the customization start, what are the steps and how to get those steps done (considering on skill, tools and material as well). What I experience is whenever I try to do start it without a plan, I will always end up with lot of mistakes and the worse part will be the result turns out negatively. I always think of creating my own concept for every gunpla kit that I’m going to build but this isn’t easy for me to get there (especially when I restricted from my wallet, space and time). I always think that if I can get those tools and material, I can be as perfect as other but the fact is I can’t even master the tools and material yet, how can I get there? So, my solution for myself now will be take more time to understand and learn what I got before I can get to another level. The reason I wrote this post is simple, the trend of customizing kit is growing no matter in OC or PC. It is great to see lot of masterpiece out there so the amateur (like me) can study more and expose to different concept.

The first step for customization will be the concept before anything start, maybe I should explain what is OC and PC base on my own definition in gunpla. Customizing gunpla base on the gundam original concept (OC) is basically improving the gunpla model kit in terms of detail up, improving joint or proportion, adding more panel line, pla-plate, re-paint, casting new part (such as adding armor or weapon) and adding customize decal that related back to the original gundam concept but the overall customization done on the kit will still remain the original concept of the gunpla (gundam).One of the most important thing to remain the gunpla customization in OC should be the color scheme. Whenever the gunpla re-paint, majority of the color selections should be similar to original color scheme. Converting gunpla kit to another gunpla such using MG Freedom inner frame and transform it in to Justice to make a Justice MG Format can also be categorize in OC in my definition. As long as the end result is what we can find in gundam series, it should categorize in OC. It might feel boring on building and customizing a gunpla kit base on the gundam original concept but sometime, OC can be better than PC and it can be harder to get it done especially when improving some old MG to match up the latest MG. 

Scratch build or using conversion part should also consider in OC as long the end result is what we can find in gundam series.  

\